Anti-Scratch Winged Pinchweld Trimming Blade - 20mm (Narrow Profile)

Part #: WK6-MN

Anti-Scratch Winged Pinchweld Trimming Blade - 20mm (Narrow Profile)

Double click on above image to view full picture

Zoom Out
Zoom In

More Views


No more scratching or touching up paintwork!

BTB's exclusive "winged" non-scratch pinchweld trimming blades allow easy and safe removal of the remaining urethane adhesive bead from the vehicle pinchweld/body and glass after glass or panel removal, leaving the correct thickness of adhesive for re-bonding.

They have a special and distinct radius grind cutting edge to the underside, extending up the vertical wing on each side, which avoids any damage to painted pinchwelds, including the vertical pinchweld wall

The WK6-M is BTB's most popular pinchweld trimming blade. The flat cutting section of the WK6-M blade is 20mm wide, so covers most pinchweld trimming applications.

The narrow profile provides better clearance when using these blades up against the raised section on vehicle roof panels, A-Pillars and trims/fittings.

  • eliminate scratching of paintwork on pinchweld and vertical pinchweld wall
  • maintain the integrity of the E-Coat
  • Safely remove urethane embedded with shattered tempered glass fragments e.g. smashed rear hatch glass

This blade is most often used in the BTB WK7 and WK7L manual handles but can also be used in the BTB WK10HD air power tool or the BTB 12Volt battery powered E-Tool for heavier duty applications.

These blades are also excellent for capping/removing the top section of the encapsulation on damaged encapsulated glasses to allow access to adhesive from outside vehicle using BTB's Powered Cold Knife Blades.

Auto Body Repairers can also use these blades for quick and safe removal of:

  • Body Deadener
  • Hemlock Seals
  • Seam Seals
  • Spray-on bed liners

See BTB's Pinchweld Trimming blades in action.

Additional Information

Part # WK6-MN