Safety V Edge Serrated Reverse Offset Blade for Curved and Encapsulated Glass - 150mm

Part #: WK24ZVR-S
OR

Safety V Edge Serrated Reverse Offset Blade for Curved and Encapsulated Glass - 150mm

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

The 'VR' BLUE label blades are a safety edge version of their equivalent 'R' ORANGE blades. BLUE blades are for safe removal of undamaged encapsulated glasses bonded to softer material panels such as aluminium and carbon fibre.

The "V" grind ensures the cutting edge is suspended away from the top and bottom surface of the blade, so the sharp cutting edge will not contact the panel surface.

They cut the adhesive with the flat side of the blade against the vehicle body/pinchweld from inside vehicle, leaving the urethane on the glass surface, while avoiding contact with encapsulation.

  • The BLUE WK24ZVR-S blade is a safety edge version of the ORANGE WK24ZR-S blade
  • Flexible serrated short blade used for cutting against pinchweld from inside vehicle in curved encapsulated glass removal applications
  • BLUE and ORANGE blades should be introduced into the adhesive at the pinchweld, and will hug the pinchweld
  • It is very important to use a controller arm underneath all BLUE / reverse blades

Cutting depth control arm for this blade: WK11CW

Additional Information

Part # WK24ZVR-S