Safety V Edge Serrated Reverse Offset Blade for Encapsulated Glass - 140mm

Part #: WK4ZVR-S
OR

Safety V Edge Serrated Reverse Offset Blade for Encapsulated Glass - 140mm

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

The 'VR' BLUE label blades are a safety edge version of their equivalent 'R' ORANGE blades. BLUE blades are for safe removal of undamaged encapsulated glasses bonded to softer material panels such as aluminium and carbon fibre.

The "V" grind ensures the cutting edge is suspended away from the top and bottom surface of the blade, so the sharp cutting edge will not contact the panel surface

They cut the adhesive with the flat side of the blade against the vehicle body/pinchweld from inside vehicle, leaving the urethane on the glass surface, while avoiding contact with encapsulation.

  • The BLUE WK4ZVR-S blade is a safety edge version of the ORANGE WK4ZR-S blade
  • Rigid serrated short blade used for cutting against pinchweld from inside vehicle in flat or slightly curved encapsulated glass removal applications
  • BLUE and ORANGE blades should be introduced into the adhesive at the pinchweld, and will hug the pinchweld
  • It is very important to use a controller arm underneath all BLUE / reverse blades

Cutting depth control arm for this blade:

11CW

Additional Information

Part # WK4ZVR-S