Equalizer Viper

Designed for small quarter glass removals and can also be used on windscreens and back glasses.
Sold Exclusively in Australia
by BTB Tools.
Ratcheting Wire Removal System
The Equalizer® Viper™ is a wire removal device designed for small quarter glass removals, but can also be used on windscreens and back glasses. It's small, light, and easy to manoeuvre. Simply use the 1/2" drive ratchet with the supplied socket slipped over the shaft of the Viper tool to rotate the wire reel. The double direction capability of the reel allows for optimum use and the magnetic points on the ratchet shaft ensure that your ratchet stays firmly attached to the tool, even in steep / vertical cutting scenarios.
THE VIP1124 KIT INCLUDES
1 x Viper Tool (Viper Cup, 1/2" Drive Ratchet & 1-1/8" Socket)
1 x Clear Protect-A-Dash, 1 x T-Handle Centerstart,
1 x Mini Anchor Cup, 1 x 22m Roll of Squire Wire.
All packaged in a foam-lined canvas case.
THE VIP1138 DELUXE KIT INCLUDES
1 x Viper Tool (Viper Cup, 1/2" Drive Ratchet & 1-1/8" Socket),
1 x Pistol Grip Center Start, 1 x Mini Anchor,
1 x Venom™ Wire Dispensing Unit
(Includes 1 x 50 Metre Roll of Squire2 Wire),
1 x 50 Metre Roll of Squire2 Wire,
1 x 30 Metre Roll of RipCord™ HD,
1 x Wire Grabber Pliers & Cutter, 7 x Guide Pins,
1 x Clear Headliner Protector, 1 x Clear Dash Protector
All packaged in a foam-lined canvas case.
WHY A WIRE CUT OUT TOOL
The auto glass in today's modern vehicles have tighter tolerances between the glass and the body. It is becoming quite impossible on some vehicles to not damage the pinchweld when removing the glass. Many technicians have started using cut-out wire or cord in an effort to save the pinchweld from possible damage. This will save valuable time in priming and will prevent rust from forming on missed areas of damage. Wire removal tools reduce physical strain on a technician's body as opposed to other removal tools.
Equalizer® wire tools use square, round, braided wire & cord / fibre line.
FEATURES
- The Viper has a socket and omni-directional ratchet
- 135mm cup diameter on Viper
- 54mm cup diameter on the Mini-Anchor
- With one revolution it cuts 76mm
BENEFITS
- Omni-directional ratchet allows manoeuvring in any direction
- Mini-Anchor’s compact size allows the wire to remain closer to the glass surface, fit in tight spots and on small quarter glasses
- VIPER™can remove windshields, back glasses (including Sliders),and quarter glasses that will accept a 135mm cup
REPLACEMENT ACCESSORIES
VT1136
VIPER CUP AND RATCHET
MAC1125
MINI ANCHOR CUP
WDD167
VENOM WIRE DISPENSER
SWL165
SQUIRE
SQUARE
CUT-OUT WIRE
RC300
RIPCORD
FIBRE LINE