Moulding Release Blade - Long Left Tail

Part #: WK16LL

Moulding Release Blade - Long Left Tail

Double click on above image to view full picture

Zoom Out
Zoom In

More Views


The WK16 blades allow for a windshield with an applied moulding to have the glass cut out of the vehicle, while the applied moulding remains bonded to the vehicle body.

The blade tip is slid between the moulding and glass and pulled along to sever the butyl or double-sided tape holding the moulding to the glass edge. Once released, the glass will slide down and out of the moulding.

  • The WK16LL blade has a longer 8mm left facing tip.

BTB recommends use in the WK7 Manual handles but they can also be used in the BTB air tool or battery powered "E-Tool".

Additional Information

Part # WK16LL